Hacking the Melbourne Grand Organ
The Melbourne Town Hall Organ is the largest instrument in the southern hemisphere with almost 8 thousand pipes plus bells and drums. The instrument is retrofitted with a MIDI system by SSOS. This system can send and receive note information on separate channels for each manual as well as CCs for controlling swell. The stops are opened and closed using sysex messages which is the complicating factor when working from within Live. The system I ended up devising was a combination of Max for Live devices recreating the stops of each manual which would send sysex messages over to a separate Max patch via UDP/OSC. This patch would then forward the messages to the instrument. In this way we were able to step around Live’s sysex limitations.
The two musicians were both running live, James using his EWI and a live MIDI looping setup to control the four top manuals of the organ and Tristan controlling the pedal manual with a rockband keytar and also running drums and percussion out to the PA. The note information from the two musicians was passed over to myself, also running live and VIZZable where I was able to visualise the note information, mix that with a live camera and send the resulting video out to two projectors, piping through mad mapper and quartz composer along the way.
The biggest hurdle we had to overcome was with the organ getting stuck notes. The organ would stick on a particular note and we’d need to turn it off and on to get it going again, a process that took five to ten minutes. This turned out to be caused by flooding the organ with too many sysex messages in too short a time. By cueing the messages and then emptying the list at a steady rate we were able to open and close stops reliably.
The end result of all of this coercing of old and new technology was a 40 minute improvised audio-visual set intended to bemuse and perplex.